InnoCigs EVIC PRIMO 2.0 Manuel D'utilisation page 67

INNOCIGS EVIC PRIMO 2.0 – REGULATING THE POWER OUTPUT & TEMPERATURE
General Operation to control the Power and temperature Output
The device has a power range of 1 to 228 watts. Changing the wattage will also change the taste and the vapor
behavior. The higher the wattage is set, the more intense the vapor development will be. The same is true for the
temperature control: the higher the temperature, the greater the vapor development. Press and hold down the
right or left setting button to automatically increase or decrease the wattage or temperature.
Switching between °C and °F
The temperature can be set between 100 and 315°C or 200 to 600°F in TCR mode. Use the "Up" or "Down" but-
tons to increase or decrease the temperature. Press and hold down the settings buttons to set the value faster.
65