InnoCigs EVIC PRIMO 2.0 Manuel D'utilisation page 74

INNOCIGS EVIC PRIMO 2.0 – ERROR MESSAGES & PROTECTIONS
No Atomizer Head detected
"NO ATOMIZER FOUND" will appear on the screen when no atomizer is connected.
New installation of the Atomizer Head
If a head with a greater resistance than that of the previous one is used, the resistance of the
head must be reset.
When the head is removed, press the Fire button for a few seconds to start the reset. An
installation of a new coil will be detected automatically and the message "New Coil Up" / "Same
Coil Down" will be displayed. Press the "Up" button to confirm a new coil.
If the message appears to be inadvertent (such as when re-using the same coil which is still
warm), press the "Down" button to establish the "basic resistance."
Weak Battery
If the voltage of the battery drops below 2.9 V, the device will display "WEAK BATTERY." The output power will be
reduced adequate to voltage.
72