InnoCigs EVIC PRIMO 2.0 Manuel D'utilisation page 72

INNOCIGS EVIC PRIMO 2.0 – OPERATING & CHANGING THE VAPING MODES
Locking and unlocking the Atomizer Resistor in TC/TCR Mode
In TEMP mode, press the Fire button 3 times and the "Down" button to enter the submenu. While the display is
flashing, press the "Down" key twice, then press the "Up" key to lock or unlock the resistor.
Note:
1. Please use this lock function only at room temperature so that the correct base resistance can be displayed
in lock mode. If this is not the case, faulty measuring results can occur which can also adversely affect the
protective functions. Once the resistor is locked, you can remove the clearomizer so that the resistor can
be re-used.
2. Unlock the resistor before using a new head so that the temperature control will work properly. Use a new
head only at room temperature.
70