Publicité
Les langues disponibles
Les langues disponibles
• Close the oil tank cover.
8. OPERATION
8.1 Connecting to the mains supply
• Connect the power cable to a suitable extension cable. Make sure that the extension cable
is designed for the power rating of the chainsaw.
• Secure the extension cable as shown in Fig. 11 to protect it against pulling forces and
accidental disconnection.
• Connect the extension cable to a professionally installed safety mains outlet with ground
contact.
Fig.11
We recommend using a cable with a bright and highly visible color, e.g. red or yellow. This
will reduce the risk of accidentally damaging it with the chainsaw.
8.2 Switching on/off
Switching on
• Hold the chainsaw by the handles with both hands as shown in Fig. 12 (thumbs under the
handles).
Fig.12
• Press and hold the safety lock-off (Fig. 1/Item 5).
• Switch on the chainsaw at the ON/OFF switch. You can then release the safety lock-off.
Switching off
Release the ON/OFF switch (Fig. 1/Item 6). The integrated brake will bring the running
chainsaw to a standstill within a very short space of time. Always disconnect the mains plug
when you stop working, even if it is only for a short time.
Caution: Always carry the saw by the front handle. If the saw is plugged in and you carry it by
the rear handle (which is where the switches are located), then there is a risk that you could
accidentally press the safety lock-off and the ON/OFF switch at the same time, and the
chainsaw could inadvertently start up.
27
Publicité
