Publicité
Les langues disponibles
Les langues disponibles
f)
Wear suitable work clothes. Do not wear loose clothing or jewellery. Keep hair, clothes
and gloves away from moving parts. Loose clothing, jewellery or long hair can get
trapped in moving parts.
g)
If vacuuming devices and draining devices can be fitted, make sure that these are
correctly attached and correctly used. The use of a dust extraction system can reduce
the danger posed by dust.
4.4. Usage and treatment of the electric tool
a)
Do not overload the appliance. Use the correct tool for your work. You will be able to
work better and more safely within the given performance boundaries.
b)
Do not use an electric tool with a defective switch. An electric tool that cannot be
switched on or off is dangerous and must be repaired.
c)
Pull the plug out of the socket and/or remove the battery before making any
adjustments to the appliance, changing accessories or put the appliance down. This
safety measure prevents starting the electric tool unintentionally.
d)
Keep unused electric tools out of the reach of children. Do not allow people who are not
e)
familiar with the appliance or who have not read these instructions to use the appliance.
Electric tools are dangerous if they are used by inexperienced people.
f)
Clean your electric tool carefully. Check whether moving parts are functioning properly
and not jamming, whether parts are broken or damaged enough that the functioning of
this electric tool is affected. Have damaged parts repaired before using the appliance.
Many accidents are caused by badly maintained electric tools.
g)
Keep your cutting tools sharp and clean. Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to control.
h)
Make sure to use electric tools, accessories, attachments, etc. in accordance with these
instructions. Take the conditions in your work area and the job in hand into account.
Using electric tools for any purpose other than the one for which they are intended can
lead to dangerous situations.
4.5. Service
Have your electric tool repaired only by trained personnel using only genuine spare parts.
This will ensure that your electric tool remains safe to use.
5. SPECIAL SAFETY INSTRUCTIONS FOR CHAINSAWS
•
When the chainsaw is running make sure that you keep all parts of your body away
from the chainsaw. Before starting up the chainsaw make sure that it is not touching
anything. When you are working with a chainsaw, a single moment of carelessness is
all it takes for clothing or parts of your body to get caught by the chainsaw.
•
Always hold the chainsaw securely with your right hand on the rear handle and your left
hand on the front handle. Holding the chainsaw with your hands in other positions
increases the risk of injury and is therefore not allowed.
•
Wear safety goggles and ear protection. Other safety equipment for the head, hands,
legs and feet is recommended. Correct protective clothing reduces the risk of injury
caused by catapulted chips or in the event of accidental contact with the chainsaw.
22
Publicité
