Automatic Mode; Setting The Effect Speed; Sound-To-Light Mode - MC Crypt DL-1006 Notice D'emploi

10. Operation
10-channel DMX operation
DMX channel Value
1 000
001-199
200-247
248-255
2 000-255
3 000-255
4 000-255
5 000-255
6 000-255
7 000-255
8 000-255
9 000-255
10 000-255
c) Automatic Mode
• Push the button FUNC until ShNd is displayed and push the button ENTER.
• Select the desired automatic effect Pr01 to Pr11 with the arrows.
• Confirm your selection again with ENTER.
d) Setting the Effect Speed
• Push the button FUNC until SPed is displayed then push the button ENTER.
• Select the desired effect speed SP01 to SP32 with the arrows.
• Confirm your selection again with ENTER.
e) Sound-to-Light Mode
• Push the button FUNC until SoUn is displayed and push the button ENTER.
• Select on with the arrows to activate sound-to-light mode.
• Confirm your selection again with ENTER.
• The effect light is controlled via an installed microphone in time with the music in this mode.
Function
Lights off
Overall brightness dark > bright
Flash effect slow > fast
All colours full brightness
Brightness setting red 1st segment dark > bright
Brightness setting green 1st segment dark > bright
Brightness setting blue 1st segment dark > bright
Brightness setting red 2nd segment dark > bright
Brightness setting green 2nd segment dark > bright
Brightness setting blue 2nd segment dark > bright
Brightness setting red 3rd segment dark > bright
Brightness setting green 3rd segment dark > bright
Brightness setting blue 3rd segment dark > bright
29