MC Crypt DL-1006 Notice D'emploi page 28

10. Operation
Setting the DMX operating mode
• Set >> 3 ch in menu ChNd to operate the device in 3-channel DMX operation.
• Set >> 10 ch in menu ChNd to operate the device in 10-channel DMX operation.
Setting the DMX starting address
• Push the button FUNC until Addr is displayed and push the button ENTER.
• Select the desired starting address 001-503 with the arrows.
• Confirm your selection again with ENTER.
The following tables provide information about the effects of the settings on the individual DMX channels.
3-channel DMX operation
DMX channel Value
1 000
001-255
2 000-025
026-048
049-071
072-094
095-117
118-140
141-163
164-186
187-209
210-232
233-255
3 000-010
011-255
28
Function
Lights off
Overall brightness dark > bright
Colour sequence controller with fade
Red, green, blue in sequence
All colours in sequence
Red flashing effect
Green flashing effect
Blue flashing effect
Yellow flash
Violet flash
Teal flash
White flash
Flash with colour change
Sound-to-light control
Automatic operation speed slow > fast