C-Wh5 User Interface (Ui) And Its Functions - Optika Italy H Serie Manuel D'utilisation

10. C-WH5 User Interface (UI) and Its Functions

The C-WH5 UI shown in Fig. 5 includes a Camera Control Panel on the left side of the video window, a Measurement Tool-
bar on the upper side of the video window, a Camera Control Toolbar on the bottom of the video window.
Notes:
1. When users move mouse cursor to the left side of the video window, the Camera Control Panel will pop up automati-
cally.
2. When user moves mouse cursor to the bottom of the video window, the Camera Control Toolbar will pop up automat-
ically.
3. Move the mouse cursor to the upper side of the video window: a Measurement Toolbar will pop up for the calibration and
measurement operations. When user left-clicks the Float/Fixed button
Toolbar will be fixed. In this case the Camera Control Panel will not pop up automatically even if users move mouse cursor to
left side of the video windows. Only when user left-clicks the
procedure it will be possible to perform other operations on the Camera Control Panel, or Synthesis Camera Control Toolbar.
During the measuring process, when a specific measuring object is selected an Object Location & Attributes Control
Bar
Figure 5 - Camera Control User Interface
will appear for changing location and properties of the selected objects.
on the Measurement Toolbar, the Measurement
button on the Measurement Toolbar to exit from measuring
Page 15