C-He Basic Features; Quick Instructions For C-He Camera; Hdmi Mode - Optika Italy H Serie Manuel D'utilisation

7.

C-HE Basic features

C-HE is a HDMI + SD card CMOS camera.
HDMI is used as the data transfer interface to HDMI display.
For HDMI output, the Camera Control Panel+ Measurement Toolbar and Camera Control Toolbar are overlaid on the HDMI
screen when the mouse move to the related region.
The USB mouse is used to set the camera.
The C-HE's basic features are as follows:
For HDMI output:
• All in 1(HDMI + SD card) C-mount camera with Aptina high sensitivity CMOS sensor.
• Resolution 2MP (720p):
• Built-in mouse control.
• Built-in image capture to SD card.
• Built-in camera control panel, including exposure (manual/auto) / gain, color adjustment, sharpness control.
• Built-in toolbar including zoom, mirror, freeze, crosshair:
• Built-in toolbar for measurement.
7.1

Quick Instructions for C-HE camera

Before turning on the camera, please connect the standard C-mount camera to the camera adapter and insert it into the
microscope's trinocular port.
① HDMI plug
② USB mouse plug
③ Power supply plug
7.1.1

HDMI Mode

1. Plug the HDMI cable into the HDMI port ① to connect the C-HE camera to HDMI display.
2. Plug a USB mouse into USB Mouse port ② to get control of the camera by using built-in software.
• The camera cannot be connected to a PC in any way. The available USB port is used to connect the mouse.
3. Insert SD card into SD Card Slot ④ for saving captured images.
4. Plug 12V/1A power adapter into DC 12V slot ③ to supply power for the camera. The LED Indicator ⑤ will turn into blue.
5. Move mouse cursor to the left side of the video window, a Camera Control Panel will appear. It includes Manual/ Auto-
matic Exposure, White Balance, Sharpness and other functions, please refer to 8.1 for details.
6. Move mouse cursor to the bottom of the video window and a Camera Control Toolbar will appear. Operations like Zoom
In, Zoom Out, Flip, Freeze, Cross Line, and etc. can be achieved. Please refer to 8.2 for details.
7. Move mouse cursor to the upper side of the video window, a Measurement Toolbar with calibration and other measure-
ment tools will appear, please refer to 6.3 for details. The measurement data can be output with *.CSV format.
②
①
⑤
④
③
Figure 1 - C-HE Rear Cover
④ SD card slot
⑤ LED indicator
Page 7