Sygonix 1911206 Notice D'emploi page 34

• The product casing becomes hot during op-
• Do not use the product if it is damaged. There
• If it can be assumed that safe operation is no
• Then, have the product checked by a trained
34
eration. Therefore, always ensure there is ade-
quate ventilation and never cover the product.
is a risk of fatal electric shock! A damaged
connection cable should only be replaced by
a specialist.
longer possible, the device must be turned off
and precautions must be taken to ensure that
it is not used unintentionally. Do not touch the
product.
First, switch off the mains voltage to all poles
(switch off the connected circuit breaker or
remove the fuse and then switch off the con-
nected GFCI).
Do not disconnect the product from the mains
voltage at all poles until this has been done.
electrician or dispose of the product in an envi-
ronmentally friendly manner.