Intended Use - Sygonix 1911206 Notice D'emploi

3. Intended use

The product is intended for permanent installation in a device
with protection class II (without protective conductor). Alter-
natively, it can also be integrated in the connection cable of a
device with protection class II (without protective conductor).
It is used for wireless control of electrical devices via WiFi,
for example, a light.
Operation or programming is carried out via the "Smart Liv-
ing" app. A free account is necessary to use this app. It must
be created during initial setup of the app.
The product is only suitable for connection to the mains volt-
age (see chapter "13. Technical Data").
This product is intended for indoor use only. Do not use it
outdoors. Do not expose the product to moisture (e.g. in
bathrooms).
For safety and approval purposes, do not rebuild and/or
modify this product. Using the product for purposes other
than those described above may damage the product. In
addition, improper use can cause hazards such as a short
circuit, fire or electric shock.
26