Resetting Factory Settings - Sygonix 1911206 Notice D'emploi

8. Resetting factory settings

• The built-in switch must be connected to the mains volt-
age.
• Press and hold down the button at the top of the built-in
switch for approx. three seconds.
If the output of the built-in switch has previously been
turned off, the integrated blue LED light up briefly.
If the output of the built-in switch has previously been
turned on, the output will turn off briefly and then turn
on again.
• Then release the button again.
• The built-in WiFi switch is thus reset to the factory set-
tings.
40