Sygonix 1911206 Notice D'emploi page 33

• Install all cables so that nobody will trip over
them.
• Never put the product into operation imme-
diately after it has been brought from a cold
room into a warm one (for example, during
transport). The resulting condensation may de-
stroy the product or cause an electrical shock!
Let the product reach room temperature first.
Wait until the condensation has evaporated;
this may take several hours. Only after this
may the product be connected to the power
supply and put into use.
• Never operate the product in vehicles.
• Only use the product in temperate climates. It
is not suitable for use in tropical climates. For
permissible ambient conditions, see chapter
"13. Technical Data".
33