Trevi XR 82 BT Mode D'emploi page 7

FUNCTION DESCRIPTION
1
5
CHARGING
The speaker must be recharged when switched off.
1. Please fully charge the battery before using the device for the first time.
2. Connect the USB cable to the unit and the other end to PC in order to commence charging.
3. The Red LED will turn on indicating that the unit is now charging. Once the light goes off, this
means that the unit is completely charged and ready to use
Note: when the battery is low the voice message will play "Battery is low, recharge" a few
times before the device switches off automatically.
BASIC OPERATION
Slide the ON/OFF key (8) to turn on/off the speaker.
Press the M button (1) to choose from:
- Bluetooth mode.
- Micro SD mode, if present a micro SD type memory in the slot (6) it will start playback of the
music automatically.
- USB Mode, if present a USB-type memory in the slot (5), the device will start playing songs
automatically.
- Radio Mode.
VOLUME ADJUSTMENT
+ -
Keep the (3) / (2) button to increase or lower the volume of music.
MUSIC PLAYBACK FROM MICRO SD CARD/ USB MEMORY
- Power on the speaker;
- insert a Micro SD card (make sure to insert the memory card carefully and in the correct
position) or insert the USB flash disk inside to play music;
2
3
8
7
6
4
1. M button, MODE.
-
2. button, Previous/ Vol down.
+
3. button, Next/ Vol up.
>
4. button, Play/ Pausa/ Handsfree.
5. USB disk port.
6. TF card slot.
7. Charging port.
8. Power ON/ OFF.