Control Elements And Connections; General Remarks; Control Panel; Connections - nissen 12/24 V-35A Instructions De Service

Control elements and connections

General remarks

Control panel

No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)

Connections

36
NOTE! As a result of firmware updates, you may find that there are functions
available on your unit that are not described in these operating instructions or vice
versa. Certain illustrations may also differ slightly from the actual control elements
on your device. However, these controls function in exactly the same way.
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty rules
(1)
(2)
(3)
(4)
(5)
Function
100% charge level indicator
75% charge level indicator
50% charge level indicator
25% charge level indicator
12 V ready indicator
24 V ready indicator
Stop/Start button
- for interrupting and restarting charging
- for manually selecting the charging voltage - 12 V or 24 V
- for accessing the Setup menu and selecting the synergic line
Error indicator
NOTE! Danger of damage to charger and accessories. Only connect options and
system add-ons when the mains plug is unplugged and the charger leads are dis-
connected from the battery.
12/24V - 35A
(6)
(7)
(8)