Before Commissioning; Safety; Intended Purpose; Mains Connection - nissen 12/24 V-35A Instructions De Service

Système de chargeur de batteries
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before commissioning

Safety

Intended purpose

The charger is only for charging batteries as described in the "Technical data" section. Any
use above and beyond this purpose is deemed improper. The manufacturer shall not be
liable for any damage resulting from such improper use. Utilisation in accordance with the
intended purpose also comprises
-
-

Mains connection

The rating plate, which is located on the housing, contains information about the permitted
mains voltage. The charger is designed for this mains voltage only. The fuse protection re-
quired for the mains lead can be found in the "Technical data" section. If there is no mains
lead or mains plug on your device, fit one that conforms to national standards.
Safety features -
The following safety features are provided as standard with the Active Inverter:
standard protec-
-
tion equipment
-
-
-
-
-
WARNING! Incorrect operation may result in serious injury or damage. Do not
use the functions described here until you have thoroughly read and understood
the following documents:
-
Operating instructions
-
All the operating instructions for the system components, especially the safe-
ty rules
-
Battery and vehicle manufacturers' operating instructions and safety rules
following all the information in the operating instructions
regular checking of the mains and charger leads
WARNING! Charging dry batteries (primary cells) and non-rechargeable batter-
ies can cause serious injury or damage, and is therefore prohibited.
NOTE! Inadequately dimensioned electrical installations can cause serious dam-
age. The mains lead and its fuse must be dimensioned to suit the local power sup-
ply. The technical data shown on the rating plate applies.
Voltage-free and spark-free terminals, where fitted, protect against explosions
Reverse polarity protection prevents the charger from being damaged or destroyed
Short-circuit protection provides effective protection for the charger. The fuse does not
need to be replaced in the event of a short circuit
A charging time monitor provides effective protection against overcharging and de-
struction of the battery
Due to the high degree of protection, there is a lower rate of contamination in adverse
conditions. This adds to the charger's reliability.
Overtemperature protection through derating (charging current reduced if the temper-
ature rises above the permitted level)
35

Publicité

Table des Matières
loading

Table des Matières