Door/Window Contact - Smanos L020 Manuel D'utilisation

EN

Door/Window Contact

The contact contains a transmitter and a magnet, which can be
mounted on a door, window or any objects that can be opened
or closed. When the transmitter and magnet are separated over
2 cm, the contact will send a signal to the control panel to trigger
an alarm.
Overview
LED Indicator
Transmitter
Magnet
Front Side
LED Indication
Blinks once: Door/window open detected.
Blinks once per 3 seconds after triggered:
possible.
Note: When tamper switch is pressed, system will alarm immediately.
Installation
Make sure the contacts work properly before installation.
Step 1: Choose a suitable installation location
It can be installed on doors,
windows or any other objects that
can be opened or closed. If it is
applied to metal doors, please
place spacer under the transmitter
and magnet.
Tamper Switch
Back Side
Step 2: Secure the contacts with double-sided tapes
Low battery. Push
Make sure the triangle marks on
the side of transmitter and magnet
are closed to each other and within
the range of 1cm. As long as the
space between them is over 2cm,
the LED on the transmitter will blink
once.
EN
>2cm