Control Panel And Operation - Royal Sovereign RBC-ED250-CA Guide D'utilisation

CONTROL PANEL AND OPERATION

Your unit has been factory defaulted to the recommended bill counter setting and is set to Canadian Counterfeit
counting mode. Unless you want to change settings on the bill counter, you now are ready to start using the bill
counter. Please follow Quick Start Guide to begin (Page 4). To change control panel settings and for advanced
features, refer to below.
CF (Counterfeit Detection) – This unit is defaulted to the ideal setting to be used for detecting fake or suspect bills
when counting Canadian or USA banknotes.
During operation, if this unit detects an error due to one of these methods, the machine will stop counting to allow
for removal of the suspect bill and a descriptive error code will display. To resume counting, press 'ENTER/START'
Ultraviolet Counterfeit Detection (UV)
The Ultraviolet detector will look for suspect bills that use white or bleached paper.
Magnetic Counterfeit Detection (MG)
The Magnetic detector will look for the presence of magnetic components that are standard in
authentic bills.
Infrared Counterfeit Detection (IR)
The Infrared sensors detect double and half notes and verifies proper dimensional specifications
of banknotes
5