Royal Sovereign RBC-ED250-CA Guide D'utilisation page 8

CONTROL PANEL AND OPERATION
REPORT
Select Report to view the count record. By holding "REPORT", you can view the total number of bills and values of
each denomination along with a grand total. Press ENTER/START to exit this screen. Refer to Value Counting
section of this manual for more details
CLEAR/MENU
"CLEAR/MENU" provides dual options.
Clear - Press "CLEAR/MENU" to clear the counted bills. The count will return to '0'. You are ready to begin another
count
Menu: Press and hold "CLEAR/MENU" to enter the Menu Screen. A total of 8 options are available and is outlined
below
1.CURRENCY SET - This unit is defaulted to count Canadian banknotes with the default setting of counterfeit
detection turned ON. When set to counterfeit detection setting, any suspect or suspicious banknotes will be
detected. The unit will stop and an alarm will sound. To switch between Canadian and US banknote settings, in
the Menu CURRENCY SET, press "ENTER/START" to enter this setting. Use the "▼ " or "▲" buttons to select USD
(American currency) or CAD (Canadian currency). Next, press "ENTER/START"
2.SPEED SET – In MENU screen, use the "▼ " or "▲" buttons to select SPEED SET. Press "ENTER/START" to enter
SPEED SET. There are 3 speed options. Press the "▼ " or "▲" buttons to select the desired speed setting.
SPEED 1. 900pcs/min
SPEED2. 1,200pcs/min
SPEED3, 1,500pcs/min.
Next, press "ENTER/START".
7
(Continued)