Introduction; Features; Optional Accessory - Integra Padgett S Guide De L'utilisateur

Introduction

The Integra® Padgett® Slimline Dermatome Models S and S6 are intended for use in the
cutting of skin grafts for use in plastic surgery and/or burn treatment.
These instruments are intended only for professional use in hospitals and similar medical
facilities, where the patient will be under the supervision of trained personnel.

Features

• Both the Model S and S6 feature a 100 - 250V~ power supply that will adapt to any
input voltage.
• Power switch is controlled by the thumb and is located on the top of the handpiece.
• The dermatome complete kit is provided in a plastic carrying case with the dermatome
handpiece, power supply, power supply wall cord, 13' (3.96 m) handpiece cable, guard
plate, width clips, dermatome screwdriver, pin position guide, and dermatome wrench.
• Model S includes 2 in. (5.08 cm), 3 in. (7.62 cm) and 4 in. (10.16 cm) width clips.
• Model S6 includes 2 in. (5.08 cm), 3 in. (7.62 cm), 4 in. (10.16 cm) 5 in. (12.70 cm) and 6 in.
(15.24 cm) width clips.
• Models S and S6 are validated for steam (gravity & pre-vacuum), ethylene oxide, and
hydrogen peroxide gas plasma (STERRAD®) sterilization.

Optional Accessory

• A 25 ft (7.62 m) handpiece cable (part# 353971525) may also be purchased.
Warning: Read this manual thoroughly before using the Integra Padgett
Slimline Dermatome Models S and S6.
2