Safety Recommendations - SKF 729101 Mode D'emploi

As high pressures constitute a potential safety risk, the following instructions
must be considered:
• The equipment should only be operated by trained personnel.
• Always follow the operating instructions.
• Check the injector and all accessories carefully before use.
Never use even slightly damaged components.
• Make sure all air has been removed from the hydraulic system, before
pressurizing the injector.
• Always use a pressure gauge.
• Always prevent the workpiece/tool from being projected upon sudden release
of pressure (e.g. by use of retaining nut).
• Never use the equipment above the stated maximum pressure.
• Do not extend the handle in order to reduce the required force to reach
maximum pressure. Use hand pressure only.
• Never use the injector together with accessories which are rated below the
maximum pressure of the injector.
• Use protective goggles.
• Never modify the unit.
• Use original parts only.
• Only use clean, recommended hydraulic oils
(e.g. SKF LHMF 300, LHDF 900 or similar).
• In case of any uncertainties as regards the use of the injector, contact SKF.
6

SAFETY RECOMMENDATIONS

SKF 729101