Recommended Mounting And Dismounting Fluid - SKF 729101 Mode D'emploi

5

RECOMMENDED MOUNTING AND DISMOUNTING FLUID

SKF mounting fluid
SKF LHMF 300/5 mounting fluid is recommended when mounting shrink-fitted
components with the SKF oil injection method.
The mounting fluid is recommended for use at a temperature of 18 ... 25 °C.
The fluid contains anti-corrosive additives.
SKF dismounting fluid
SKF LHDF 900/5 dismounting fluid is recommended when dismounting shrink-
fitted components with the SKF oil injection method.
The dismounting fluid should be used at a temperature of 18 ... 25 °C.
The fluid contains anti-corrosive additives.
Due to the high viscosity of the fluid it might be necessary to operate the pump
slowly.
Important:
Make sure the fluid is kept clean, since any contamination might seriously damage
the injector equipment or the mating surfaces.
Do not mix fluids or oils of different brands.
SKF 729101 15