Publicité
Les langues disponibles
Les langues disponibles
OBJ_BUCH-0000000261-003.book Page 26 Thursday, January 11, 2018 5:30 PM
en
26
Repair and customer service.
Before mounting or replacing cutting tool or accessories, pull the power plug.
WARNING
This preventive safety measure rules out the danger of injuries through acciden-
tal starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
application tools, coolant container
Drill-motor guide (figure 16).
After several hours of operation, the play in the drill-motor guide can increase. As a conse-
quence, the drill motor can glide alongside the drill-motor guide by itself. Malfunctions are pos-
sible in machine operation. In this case, retighten all fastening screws of the drill-motor guide
correspondingly so that the drill motor can easily be moved manually, yet does not glide by
itself.
Fig. 16
2,5 mm /
3/32 in
2,5 mm /
3/32 in
2,5 mm /
3/32 in
Publicité
