Storm SAEP Manuel D'utilisation Et D'entretien page 52

Programming with the lever
• Press the "PRO-
G R A M M I N G
WITH LEVER"
button and the
screen display-
ing the program-
ming graph will
open.
• Lower the lever to start
dispensing; then, once the
desired dose is obtained,
return the lever to the idle
position. The graph and
dose length will be updat-
ed in real time according
to the progress of the lever
position whilst dispensing.
• Use the button
(A) to change the
total dose dura-
tion (millilitres)
parameter.
• Once the con-
figuration is com-
plete, the "test
dose" button can
be pressed. Press
the ( ) but-
ton to stop the
process ahead of
time.
• Save or cancel
the obtained ex-
traction curve,
then go to the
next dose sched-
ule.
52 216
of
DOSE PROGRAMING
PROGRAMMING PROGRAMMING
STANDARD DOSES WITH LEVER
SAVE VOID
DISPENSING CONFIGURATION
Selected
dose
PRE-INFUSION 10 ml
TOTAL DOSE: 37 ml
Selected
dose
DOSE PROGRAMING
PROGRAMMING PROGRAMMING
WITH LEVER
STANDARD DOSES
SAVE VOID
DOSE PROGRAMMING
Which setting would you like to
use for future dispenses?
Parameters Lever
Copy one dose to another
To copy a scheduled dose to another, proceed as follows:
• Press the copy
button (
) on
the dose selec-
tion screen.
• Select the source
dose, which will
be highlighted in
green.
• Select the des-
tination dose,
which will
highlighted
red.
• Press the button to confirm.
test
dose
The programmed doses refer to the currently se-
lected recipe. La recipe in use can be viewed from
the coffee dose selection page.
If no recipe is displayed, the "standard" recipe will be modi-
fied.
DOSE PROGRAMMING
Select the dose to be copied
DOSE PROGRAMMING
Select the target dose
DOSE PROGRAMMING
Copy dose: confirm selection
be
in
"Recipe in use"
USER Manual