Programming; Programming The Coffee Doses - Storm SAEP Manuel D'utilisation Et D'entretien

Three "Energy Saving" systems are available:
MANUAL
The Energy Saving features can only be enabled manually by
selecting the machine or group icon, as shown in the figure.
MACHINE
GROUP
PROGRAMMED
The Energy Saving functions are enabled according to the
programming. Contact a Technician to modify the program-
ming.
SELF-LEARNING
The Energy Saving functions are enabled and in self-learning
mode. The system automatically manages the energy saving
by lowering the temperature based on the cycles performed
in previous days and weeks.
To enable the "Energy Saving" system, press the
and select the desired mode:
Manual
Scheduled
Self-
learning
Call out a Technician to programme the Energy
Saving system.
50 216
of
Manual standby
Manual shutdown
Manual shutdown
Manual standby
button
Mode set
Select
Select

7. PROGRAMMING

7.1 Programming the COFFEE DOSES

Do not remove the filter holder from the dispens-
ing group when coffee is being dispensed.
Each dose must be programmed with ground cof-
fee and not with previously-used coffee grounds.
To programme coffee doses, proceed as follows:
• Select the button.
• Press the menu button
• Select the configuration button
• Press the dose programme button
Programme
doses
Time and
date
Screensaver
• Select the desired dose button (e.g. "1 espresso"
Select the dose to be programmed.
Depending on the machine model in your possession, pro-
ceed as follows.
.
.
Programme
doses
Last dispensed
Parameters
beverage
Recipe
Washes
selection
Counters Water filters
PROGRAMME DOSES
USER Manual
.
).