Cup Warmer; Energy Saving Management - Storm SAEP Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 63
• Press the desired button on the display, e.g.
wait for the steam to be dispensed.
• Wait until the dispensing process has been completed.
• to stop dispensing ahead of time, press the same key
again.
Keep the tips clean at all times using a cloth damp-
ened in lukewarm water. Milk can be kept in the
fridge for a maximum of 3-4 days.
Only leave the automatic steam wand nozzle im-
mersed in the milk for the time needed to heat it.
To change the automatic steam wand's tempera-
ture or adjust the milk froth, contact a Technician.

6.9 Cup warmer

For safety reasons, we do not recommend placing
cloths or other objects on the cup warmer shelf in
order to prevent the machine from overheating.
HIGH TEMPERATURE HAZARD: the cup warmer
can reach temperatures that may cause burns. Be
very careful.
Place the cups to be heated on the specific shelf (11).
To activate the cup warmer, press the
When the button turns red, the cup warmer is on.
To change the cup warmer temperature, see para.
"7.3 SERVICE PARAMETER configuration" on page
53.
USER Manual

6.10 Energy Saving Management

, and
To turn off the machine or activate the Energy Saving mode,
proceed as follows:
• Select the
• Select the menu button
• Select the desired function.
11
If the machine is off or in "Energy saving" mode, simply tap
the display to resume operation. The machine will return to
full operation in approximately 1 minute.
button.
In any case, the system will continue to follow the configured
energy-saving settings.
Cup warmer
button.
.
Manual standby
Manual shutdown
MACHINE
Manual shutdown
GROUP
Manual standby
49
216
of

Publicité

Table des Matières
loading

Table des Matières