Würth 0715 54 05 Notice D'utilisation page 4

GB
It is only possible to work
safely with this device if the
operating instructions and
safety information are read in
full and the instructions con-
tained therein are followed to the letter.
• Always disconnect the device from the com-
pressed air supply before working on pressure-
carrying parts of the manual tyre inflator.
Device specifications
Manual tyre inflator
Article number
Medium
Weight
Pressure gauge
Max. permissible
operating pressure
Temperature
Use for intended purpose
The manual tyre inflator is intended for no other
purpose than checking, inflating and deflating tyres.
The device must only be operated on a compressed
air network that is approved for a maximum operat-
ing pressure of 16 bar and is fitted with a safety
valve. Usage for any other purpose is considered to
be inappropriate.
Start-up
• The device is connected up using a hose, nominal
diameter 6 mm with a quick-release connector (2).
• The device should only be used with clean, con-
densation-free compressed air.
4
For your safety
0715 54 05
(0715 540 507)
Air / Nitrogen
0.9 kg
0–12 bar
16 bar
+5 °C–+40 °C
• Always check that the device is fully functional
before use. If the functionality of the device is
not guaranteed or damage is found (e. g.
cracks), the device must not be used or made
available.
• Only use original Würth spare parts when
making repairs.
• Do not make any structural changes to the
device.
Device components
6
5
1 Pressure gauge
2 Quick-release connector
(connecting thread M 18 x 1,5)
3 Operating lever
4 Valve adapter
5 Compressed air hose
6 Attachment screw (connecting thread M 18 x 1,5)
7 Suspension lug
1
2
3
7
4