Specifications - Alecto WS5400 Mode D'emploi

9 TROUBLESHOOTING
Problems
Strange or no measurement of Rain
Sensor
Strange or no measurement of
Thermo / Hygro Sensor
Strange or no measurement of Wind
Speed and Direction
and
(Signal lost for 15 minutes)
and (Signal lost for 1 hour)
Out temperature reading too high in
the day time
Some condensation beneath the UV
sensor may occur overnight
No Wi-Fi connection
Temperature or humidity not
accurate

8. SPECIFICATIONS

Indoor console unit
General Specification
Dimensions (W x H x D)
Weight
Main power
Backup battery
Operating temperature range
Operating Humidity range
Support sensors
RF frequency
(Depend on country version)
Time Related Function Specification
Time display
Hour format
Date display
Time synchronize method
Weekday languages
BAROMETER
Barometer unit
Solution
1. Check the drain hole in the rain collector.
2. Check the balance indicator.
1. Check the radiation shield.
2. Check the sensor casing.
1. Check wind cups (Anemometer).
2. Check the wind vane.
1. Relocate the console and 7-IN-1 sensor closer to each other.
2. Make sure the console is placed away from other electronic Appliances
that may interfere with the wireless communication (TVs, computers,
microwaves).
3. If problem continues, reset both console and 7-IN-1 sensor.
Make certain that the sensor array is not too close to heat generating
sources or structures, such as buildings, pavement, walls or air conditioning
units.
This will disappear when temperature rises up under the sun and will not
affect the performance of the unit.
1. Check for Wi-Fi symbol on the display, it should be always on.
2. Make sure you connect to 2.4G band but not 5G band of your Wi-Fi
router.
1. Do not place your console or sensor close to the heat source
2. If the sensor still not accurate adjust the value in calibration mode.
130 x 112 x 27.5mm (5.1 x 4.4 x 1.1 in)
220g (with batteries)
DC 5V, 1A adaptor
CR2032 (excluded)
-5˚C ~ 50˚C
10~90% RH
- 1 Wireless 7-in-1 sensor (included)
868Mhz (EU or UK version) /
HH: MM
12hr AM / PM or 24 hr
DD / MM or MM / DD
Through the server to get the local time of the console location
EN / DE / FR / ES / IT / NL / RU
hPa, inHg and mmHg
43