Alecto WS5400 Mode D'emploi page 41

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RAIN
To select the rainfall display mode
Press [ RAIN ] key to toggle between:
1. DAILY - the total rainfall from midnight (default)
2. WEEKLY - the total rainfall of the current week
3. MONTHLY- the total rainfall of the current calendar month
4. TOTAL - the total rainfall since the last reset
5. RATE - Current rainfall rate (base on 10 min rain data)
In normal mode, press and hold [ Rain ] key for 6 seconds to reset all the rainfall records.
To ensure to have correct data, please reset all the rainfall record when you re-install your wireless 7-IN-1
sensor to other location.
LIGHT INTENSITY & UV INDEX
The UV index and light intensity reading show on the bottom right
side of the display.
The console can show the different reading's daily MAX / MIN records in memory mode.
To view MAX / MIN records
In normal mode, press [ MEM ] key on the front side, to check records in below sequence:
Indoor or current CH MAX temperature
Indoor or current CH MIN humidity
humidity
outdoor MIN humidity
temperature
MIN wind chill temperature
average wind speed
MAX gust wind
MAX absolute baro pressure
intensity. Then press [ MEM ] key for back to normal mode.
You can also, press another key to exit memory mode.
Press and hold [ MEM ] key for 2 seconds to reset the current displayed record.
CALIBRATION
The console is able to calibrate the weather readings:
1. In normal mode, press and hold [ CAL ] key for 2 seconds to enter the
calibration mode as shown on the right.
2. Press [ CH / SET ] key to select different parameter as sequence: Indoor
temperature
Indoor humidity
outdoor temperature
absolute baro pressure
3. While the reading is blinking, press [ WIND / + ] or [ - ] key to adjust the offset
value.
4. When finished, press [ CH / SET ] to proceed with next calibration by
repeating process 2 - 3 above.
5. To return normal mode, press [ CAL ] key once.
Indoor or current CH MIN temperature
outdoor MAX temperature
MAX Feels like temperature
MAX dew point temperature
MAX Beaufort
MIN absolute baro pressure
CH temperature
outdoor humidity
wind speed
rain gain
UV gain
Period of rainfall and rain rate
Indoor or current CH MAX humidity
outdoor MIN temperature
MIN Feels like temperature
MIN dew point temperature
MAX relative baro pressure
MAX rain rate
MAX UV index,
CH humidity
wind direction
light intensity gain.
outdoor MAX
MAX heat index
MAX
MIN relative baro pressure
MAX light
41

Publicité

Table des Matières
loading

Table des Matières