Cleaning; Operation; Preparing The Appliance - SilverCrest CERAN-GRILL SCG 1200 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

RP91023 Cerangrill LB1 Seite 51 Montag, 17. Juni 2013 3:54 15
9. Leave the appliance switched on until
the indicator lamp 5 goes out.
10.Keep the appliance switched on for a
further 5 minutes.
11. Switch the appliance off again by turn-
ing the temperature control 6 to "OFF".
Warning! To avoid the danger of
an electric shock:
– Always remove the mains plug
before cleaning.
– Never clean the appliance under
running water.
1. Carefully remove the drip tray 4 and dis-
pose of the collected fat.
Note Normal domestic quantities can
be disposed of as domestic waste. Do
not pour the fat down the drain, as it
may solidify and cause blockages.
2. Clean the drip tray 4 by hand in dishwa-
ter.
3. Clean the grill plate 3 with a damp
cloth. Use a mild detergent to clean
heavier soiling.

7.1 Preparing the appliance

1. Place the appliance on a surface that is
firm, level and non-flammable. Maintain
a distance of approx. 50 cm from other
objects.
2. Turn the temperature control 6 to "OFF".
This switches the appliance off.
3. Insert the drip tray 4 into the slide pro-
vided on the rear of the appliance.
SCG 1200 A1
12. Remove the power supply plug and
allow the appliance to cool down.
13.Wipe the grill plate 3 again with a
damp cloth.
14.Wipe dry with a dry cloth.
The appliance is now ready to use.

6. Cleaning

Note To remove persistent soiling, use a
special ceramic-hob cleaner. For burnt-in
residues, you can also use a special
ceramic-hob scraper.
4. Clean the stainless steel casing with a
damp cloth. Use a mild detergent to
remove greasy soiling.
Note To remove persistent soiling, use a
special cleaner for stainless steel sur-
faces.
5. Do not use the appliance again until it is
completely dry.
6. Do not place the mains cable or any
other objects on the grill plate 3.

7. Operation

Note Hold the drip tray at a slightly
oblique angle at first and slide it a short
way under the grill plate. Then push the
drip tray down slightly until it engages.
4. Apply a little oil to the grill plate 3.
Note As the grill plate can become
very hot, use an oil with a high smoke
point, e.g. sunflower oil.
5. Insert the mains plug into a suitable
mains socket (see "3. Technical data"
51

Publicité

Table des Matières
loading

Table des Matières