Mitsubishi Electric CITY MULTI PKFY-P VBM-E Série Manuel D'utilisation page 13

8. Function Selection
[Function selection fl owchart]
Setting language (English)
Item 1
Change
Language
Function
selection
Mode
selection
Display
mode setting
Normal display
(Display when the air conditioner is not running)
Hold down the button and press the button for 2 seconds.
Remote controller function selection mode
Item 2
English
German
Spanish
Russian
Italian
Chinese
French
Japanese
Hold down the button and press the
Press the operation mode button.
Press the TIMER MENU button.
Press the TIMER ON/OFF button.
Dot display
BACK
PAR-21MAA
Item 3
Operation lock setting is not used.
OFF
(Initial setting value)
Operation lock setting is except On/Off button.
no1
Operation lock setting is All buttons.
no2
The automatic mode is displayed when the operation
ON
mode is selected. (Initial setting value)
The automatic mode is not displayed when the operation mode
OFF
is selected.
OFF The temperature range limit is not active. (Initial setting value)
The temperature range can be changed on cooling/dry mode.
The temperature range can be changed on heating mode.
The temperature range can be changed on automatic mode.
Automatic fi lter elevation panel up/down operation mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
Optional Parts (Panel) for details on operation.
Fixed airfl ow direction mode
Not necessary to set this mode. Refer to OPERATION MANUAL of
indoor unit for details on operation.
The remote controller will be the main controller. (Initial setting value)
The remote controller will be the sub controller.
The clock function can be used. (Initial setting value)
ON
OFF The clock function can not be used.
Weekly timer can be used. (Initial setting value)
Auto off timer can be used.
Simple timer can be used.
Timer mode can not be used.
The set contact numbers are not displayed in case of error.
OFF
(Initial setting value)
CALL- The set contact numbers are displayed in case of error.
The temperature unit °C is used. (Initial setting value)
˚C
˚F
The temperature unit °F is used.
ON
Room air temperature is displayed. (Initial setting value)
OFF Room air temperature is not displayed.
ON
One of "Automatic cooling" and "Automatic heating" is dis-
played under the automatic mode is running. (Initial setting
OFF Only "Automatic" is displayed under the automatic mode.
button for 2 seconds.
TEMP.
ON/OFF
MENU ON/OFF FILTER
MONITOR/SET DAY CHECK TEST
OPERATION
CLOCK CLEAR
13