Other Functions; Locking The Remote Controller Buttons (Operation Function Limit Controller) - Mitsubishi Electric CITY MULTI PKFY-P VBM-E Série Manuel D'utilisation

6. Timer
<Checking the Current Auto Off Timer Setting>
TIMER
AFTER
1. Be sure that the "Auto Off" is visible on the screen (at 1).
2. Hold down the Timer Menu button 2 for 3 seconds so that "Monitor"
is indicated on the screen (at 4).
• The timer remaining to shutdown appears at 5.
3. To close the monitor and return to the standard control screen, press
the Mode (Return) button 2.
<To Turn Off the Auto Off Timer...>
Hold down the Timer On/Off button 9 for 3 seconds so that "Timer
Off" appears (at 6) and the timer value (at 7) disappears.
° C
Alternatively, turn off the air conditioner itself. The timer value (at 7)
will disappear from the screen.
<To Turn On the Auto Off Timer...>
Hold down the Timer On/Off button 9 for 3 seconds. The "Timer Off"
indication disappears (at 6), and the timer setting comes on the display (at
7).
Alternatively, turn on the air conditioner. The timer value will appear at 7.
° C

7. Other Functions

7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
If you wish, you can lock the remote controller buttons. You can use
the Function Selection of remote controller to select which type of lock
to use. (For information about selecting the lock type, see section 8,
item [4]–2 (1)).
Specifi cally, you can use either of the following two lock types.
1 Lock All Buttons:
Locks all of the buttons on the remote controller.
2 Lock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that but-
tons are currently locked.
TIME SUN
° C
TEMP.
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
Timer Setting
OFF
AUTO OFF
° C
AUTO OFF
AUTO OFF
AFTER OFF
° C
AUTO OFF
Lock Indicator
FUNCTION
° C
ON/OFF
FILTER
CHECK TEST
OPERATION
CLEAR
6.2. For Wireless Remote-controller
1 Press the
AUTO STOP or AUTO START button (TIMER SET).
• Time can be set while the following symbol is blinking.
OFF timer : A
is blinking.
ON timer : A
is blinking.
h min
2 Use the
and buttons to set the desired time.
3 Canceling the timer.
To cancel the OFF timer, press the
To cancel the ON timer, press the
• It is possible to combine both OFF and ON timers.
• Pressing the ON/OFF button of the remote controller during timer
mode to stop the unit will cancel the timers.
• If the current time has not been set, the timer operation cannot be
used.
<How to Lock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds. The "Locked" indication appears on the
screen (at 1), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote control-
ler, the screen will display the "Not Available" message when you
press the buttons as described above.
° C
° C
• If you press a locked button, the "Locked" indication (at 1) will blink
on the display.
° C
° C
<How to Unlock the Buttons>
1. While holding down the Filter button 4, press and hold down the ON/
OFF button 1 for 2 seconds—so that the "Locked" indication disap-
pears from the screen (at 1).
° C
° C
A
13
2
AUTO STOP
button.
AUTO START button.
FUNCTION
FUNCTION
11