mysoda RUBY Mode D'emploi page 5

CARE AND CLEANING OF YOUR DEVICE
Useful tips:
Use as cold water as possible. You can cool down the water in a refrigerator before adding
bubbles.
Buy a couple of extra water bottles for your home so that you can provide sparkling water
and other fresh beverages for even a larger party.
Buy another CO2 cylinder in your home so that you can replace it as soon as you run out
of gas. Extra cylinders are available from Mysoda dealers.
Check out Mysoda flavor concentrate selection. Our range includes naturally sweetened
and sugar-free options for many tastes.
By using well-flowing Mysoda flavors you can mix your drink directly in the glass. This keeps
your water bottles clean and fresh longer.
By adjusting the amount of flavour concentrate, you can prepare a drink that tastes just right
for you.
8
SPARKLING WATER MAKER:
To clean your sparkling water maker, wipe with a damp
cloth. Do not immerse the device in water. Do not use any
solvents or abrasive cleaners, since this could damage the
surface.
WATER BOTTLE:
Rinse the water bottle with
clean water after each use.
Wash the bottle by hand
with warm water and hand
dishwashing detergent. Rinse
well. Wipe the outside with a
soft cloth to dry.
CO2 CYLINDER:
A used CO2 cylinder can be refilled by your Mysoda
dealer. Return the empty cylinder so that you only pay
for the gas refill.
TECHNICAL SPECIFICATIONS
Max. operating pressure: 10 bar/145 Psi
Max. operating temperature: 40°C/104°F
Bottle capacity: 1.0 L (33.8 oz.)
Max. filling volume of the bottle: 0.85L (28,7 oz)
Requires no electricity
Mysoda is a registered trademark of Mysoda Oy.
WARRANTY
We want to make sure that you enjoy your Mysoda sparkling water maker for a long
time. To ensure a complete user experience for you, our equipment has a twenty-
four (24) month warranty from the date of purchase. Our warranty is valid for
household use.
The warranty does NOT cover the following:
• Defects caused by carbonating other liquid than water.
• Wear and tear under normal consumer use (e.g. discoloration).
• Defects and damage resulting from the use of a water bottle after expiration
time.
• Defects and damage caused by a CO2 Cylinder used past its expiration date.
• Defects due to damage during transport and any abnormal household use.
• Defects due to the use of CO2 cylinders sold by non-authorized dealers.
• Defects due to improper use, modification or commercial use of the sparkling
water maker.
If your Mysoda device needs servicing, contact your local Mysoda retailer or contact
Mysoda directly by emailing us at info@mysoda.eu or visiting our website:
www.mysoda.eu.
mysoda.eu
EN
9