Port - Abus TVIP42510 Manuel Utilisateur

Domain:

Port:

User name:
Password:
8.3.3 Port
If you wish to enable external access to the camera, the following ports must be configured.
HTTP Port
The default port for HTTP transmission is 80. As an alternative, this port can be assigned a value in the range
1024~65535. If several cameras are located on the same subnetwork, each camera should have its own
unique HTTP port.
RTSP port
The default port for RTSP transmission is 554. As an alternative, this port can be assigned a value in the
range 1024~65535. If several cameras are located on the same subnetwork, each camera should have its
own unique RTSP port.
HTTPS Port
The standard port for HTTPS transmission is 443.
Server port
The standard port for SDK transmission is 8000. Communication port for internal data. As an alternative, this
port can be assigned a value in the range 1025 ~ 65535. If several IP cameras are located in the same
subnetwork, each camera should have its own unique server port.
Advanced SDK Service Port
This port is required for encrypted communication as an alternative to the server port.
Apply the settings by clicking "Save".
registered host name with the DDNS service provider (if available)
port for the service (if available)
User account identification with the DDNS service provider (ABUS server user)
Account password with the DDNS service provider (ABUS server account
password)
92