Exceptions; Intrusion Detection - Abus TVIP42510 Manuel Utilisateur

Notify the surveillance centre:
Apply the settings by clicking "Save".

8.6.3 Exceptions

Events can trigger the following exceptions:
- HDD full: If the internal SD card or a linked NAS drive is full
- HDD error: SD card or NAS drive error
- Network disconnected: Ethernet cable removed
- IP address conflict
- Illegal login: a reaction can be programmed to follow an incorrect login
The following reactions can be programmed:
- Send email:
- Notify surveillance centre (NVR/CMS)
- Activate alarm output

8.6.4 Intrusion detection

Enable intrusion detection:
Preview video:
Max. size:
The intrusion detection function triggers an event if an object stays in the
area to be monitored for longer than the set time.
configure the area to be monitored
This function determines the maximum size of the object to be detected. This is done
by drawing a rectangle in the preview video. The rectangle can be drawn anywhere in
the preview video.
Alarm triggering of the NVR/CMS for further processing (e.g.
recording on NVR, or full-screen display when alarm is
triggered in CMS)
109