First steps
2.1 Notes on low-radiation operation
This cordless telephone (compliant with the DECT standard) facilitates
low-radiation operation (ECO mode).
During a call, the handset reduces the radio output depending on the
distance from the base station. When no call is being conducted, the
handset reduces the radio output to a minimum. This does not mean
that normal DECT radiation is harmful to health. Rather, low-radiation
operation avoids any unnecessary radiation exposure.
The base does not reduce radio output! Set up the base station in a
location where you do not spend much time, for example in the
hallway. Avoid setting it up in your or your children's bedrooms or the
lounge.
3 First steps
3.1 How to use this user guide
The following method is used in this user guide to clarify instructions:
Key to be pressed
3.2 Installing the base station
Install the base station as follows:
Connect the mains adapter to the base station first and then to
1
a socket.
2
Connect one end of the telephone cable to the telephone socket
on the wall and the other to the connector on the back of the
base station.
3
The telephone and power cables should be connected as
shown in figure 3A.
8
Text ....... „Display".
Text that appears on the telephone display