Hydraulic Connection To The Internal Tank; Tank Filter; Water Renewal; Electrical Connection - Wega MININOVA CLASSIC DUO 2GR Mode D'emploi

5.3
Hydraulic connection to the internal
tank
• Fill the tank with potable water;
• periodically check the level of water in the tank
and refill as required.
2
2 5
12
Fill the tank only with cold potable water. Do not
!
use other types of liquids or carbonated beverages.
Operating without water may damage the machine.
After the machine has not been used for a period
of time it is necessary to replace the water in the
internal tank.
!
In case of slow flashing lamp (12) fill the drinking
water tank.
32
Q
5.4

Tank Filter

If the water hardness is more than 5°f, the use of
a BRITA filter (supplied) should be installed in the
tank. Not only does this filter reduce limescale build-
up, but it also eliminates any impurities and other
substances such as chlorine in the water.
Replace the filter of the tank according to the
manufacturer's instructions.
5.5

Water renewal

In case of breaks longer than 1 week, it is neces-
sary to perform the changing of the 100% of the
water contained in the hydraulic circuits of the ma-
chine, by using the appropriate dispensing points,
as described in the paragraph "Installation report".
5.6

Electrical connection

• Make sure that the information on the data plate
of the machine corresponds to the voltage of the
electrical mains;
• plug the machine into the electrical mains.
Q
2
2 5
User manual