Technical Data; Preparing The Machine; Unpacking; Positioning - Wega MININOVA CLASSIC DUO 2GR Mode D'emploi

4.2

Technical data

The nameplate of the machine is fixed on the
base of the frame under the drain pan.
The data of the appliance can be seen also on
the label located on the package of the machine.
Q
2
2 5
Power supply voltage
Absorbed power
Steam boiler capacity
Safety valve calibration
Boiler operating pressure
Feedwater pressure
Coffee dispensing pressure
Operating conditions
User manual
Technical data plate
V 230/240
2.850
W
4 / 1.06
L / gal UK
1.9 / 27.6
bar / psi
0.8-1.4 / 11.6-20.3
bar / psi
1.5-5 (MAX) /
bar / psi
21.8-72.5 (MAX)
8-9 / 116-130.5
bar / psi
°C / °F 5-40 / 41-104
5

Preparing the machine

The preparation of the machine and the instal-
lation operations must be carried out by qualified
personnel only. The installer must strictly follow the
indications provided in chapter "Warnings for the
Installer".
i
Using the machine without all the installation
operations having been carried out by technical
personnel could damage it seriously.
5.1

Unpacking

• Open the package, remove the internal protec-
tive materials and extract the machine;
• after removing the packaging, check the condi-
tion of the appliance. If in doubt, do not use it
but contact the retailer directly.
5.2

Positioning

Place the machine on a support base which is
suitable for correct and convenient use of the cof-
fee machine.
ROSSO
C:0 M:100 Y:100 K:0
NERO
C:0 M:0 Y:0 K:100
VERDE
C:100 M:0 Y:100 K:0
31