Publicité
Les langues disponibles
Les langues disponibles
AXIS M31 Network Camera Series Installation Guide
LED indicators
LED
Color
Net-
Green
work
Amber
Unlit
Status
Green
Amber
Red
Power
Green
Amber
Unit connectors
Network connector (AXIS M3113-R/AXIS M3114-R) - Female RJ-45 Ethernet connector for
10BaseT/100BaseTX. Supports Power over Ethernet. Using shielded cables is recommended.
Network connector (AXIS M3113-R M12/AXIS M3114-R M12) - Rugged female, D-coded M12
connector. Supports Power over Ethernet. Using shielded cables is recommended.
Orange/white
RX+
TX-
Green
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection. Note: The Network LED can be configured to be unlit
during normal operation. To configure, go to Setup > System Options > LED set-
tings. See the online help files for more information.
Steady green for normal operation.
Note: The Status LED can be configured to be unlit during normal operation, or to
flash only when the camera is accessed. To configure, go to Setup > System
Options > LED settings. See the online help files for more information.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Green/white
TX+
RX-
Orange
M12
Data
Power
TX+
DC+/DC-
RX+
DC-/DC+
TX-
DC+/DC-
RX-
DC-/DC+
Page 5
Publicité
