Storing The Device; Disposing Of The Device; Technical Data - Beurer medical FT 90 Mode D'emploi

To clean the entire device, please use a soft cloth slightly moistened with a mild soapy solution. Under no circum-
stances may liquid enter the device.
Do not use the device again until it is completely dry.
13.

Storing the device

The device must not be stored or used at an excessively high or low temperature or humidity (see technical specifi-
cations), in sunlight, in association with an electrical current or in dusty locations. Otherwise inaccuracies can occur.
If prolonged storage is planned, you should remove the batteries.

14. Disposing of the device

• For environmental reasons, do not dispose of the device in the household waste at the end of its useful life.
Dispose of the unit at a suitable local collection or recycling point. Dispose of the device in accordance
with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions, please
contact the local authorities responsible for waste disposal.

15. Technical Data

If the device is used other than in accordance with the specifications, perfect functioning cannot be guaranteed!
The accuracy of this thermometer has been carefully checked and developed with regard to a long useful life.
If using the device for commercial medical purposes, it must be regularly tested for accuracy by appropriate means.
Precise instructions for checking accuracy may be requested from the service address.
We reserve the right to make technical changes to improve and develop the product.
Type
Measurement method
FT 90/1
Non-contact infrared measurement
36