Klarstein AEROWAVE Mode D'emploi page 35

The step sizes for the setting time of the rotary control are as follows:
0 - 1 minutes
1 - 5 minutes
5 - 10 minutes
10 - 30 minutes
30 - 95 minutes
Microwave power table
Keystroke 1x
Leistung 100 %
Anzeige P100
Grill function
1. Press the POWER/GRILL/CONVEC/COMBI button once "P100" flashes on the
screen.
2. Either press the POWER/GRILL/CONVEC/COMBI button repeatedly or turn the
control dial to set the grill function. Stop when "G1" flashes on the screen.
3. Press the START/+30SEC button to confirm. "G1" then lights up permanently on the
screen.
4. Set the preparation time with the control dial (00:05 - 95:00 minutes).
5. Press the START/+30SEC key to start the grilling function.
Combi function
1. Press the POWER/GRILL/CONVEC/COMBI button once "P100" flashes on the
screen.
2. Either press the POWER/GRILL/CONVEC/COMBI button repeatedly or turn the
control dial to set the combination function Stop when "C1", "C2", "C3" or "C4"
flashes on the screen.
3. Press the START/+30SEC key to confirm. "C1" will then light up permanently on the
screen.
4. Use the rotary control to set the preparation time (00:05 - 95:00 minutes)
5. Press the START/+30SEC button to start the combination function.
5 seconds
10 seconds
30 seconds
1 minute
5 minutes
2x 3x
80 % 50 %
P80 P50
4x 5x
30 % 10 %
P30 P10
EN
35