Klarstein AEROWAVE Mode D'emploi page 36

EN
36
Circulation function with preheating
With the air circulation function you can prepare the food as in a traditional oven. The
microwave function is not used. It is recommended that you preheat the appliance to the
appropriate temperature before placing the food in it.
1. Press the POWER/GRILL/CONVEC/COMBI button once. "P100" flashes on the
screen.
2. Either press the POWER/GRILL/CONVEC/COMBI button repeatedly or turn
the control knob to set the air circulation function. Stop when "140" flashes on the
screen.
3. Press the START/+30SEC button to confirm.
4. Adjust the temperature by turning the control knob. A temperature between 140 °C
and 230 °C can be set.
5. Confirm the temperature setting with the START/+30SEC key.
6. Press the START/+30SEC key to start preheating When the temperature is reached,
the appliance will beep twice to remind you to place the food inside the appliance.
The temperature is displayed on the screen and flashes there.
7. Place the food inside the appliance and close the door. Use the control dial to set
the desired preparation time (the maximum setting is 95 minutes).
8. Press the START/+30SEC button to start the preparation.
Air circulation function without preheating
1. Press the POWER/GRILL/CONVEC/COMBI button once "P100" flashes on the
screen.
2. Either press the POWER/GRILL/CONVEC/COMBI button repeatedly or turn the
control dial to set the air recirculation function. Stop when "140" flashes on the
screen.
3. Press the START/+30SEC button to confirm.
4. Adjust the temperature by turning the control knob. A temperature between 140 °C
and 230 °C can be set.
5. Confirm the temperature setting with the START/+30SEC key
6. Set the desired preparation time with the rotary control (the maximum setting is 95
minutes).
7. Press the START/+30SEC key to start the preparation