Programming - BASETech 1892978 Notice D'emploi

Block mode (does not
react to card / code
inputs)
Programming mode
During programming Lit
Confirmation of the
programming (press
key "#")
Alarm status

10. Programming

Prior to commissioning your new code lock, you first have to program it and change the factory
code.
The default factory code is:
1 2 3 4
Calling up the programming mode: Input: " " --- "Master code" --- "#"
Exiting the programming mode:
Successful programming:
yellow LED (4) blinks 2 x and the buzzer sounds 2 x
Wrong programming:
yellow LED (4) blinks 5 x and the buzzer sounds 5 x
36
1 x blink in
10 seconds
interval
Lit Lit
Permanent
blinking
Lit Lit
Permanent
blinking
(yellow LED (4) and green LED (5) lit)
Input: Press button " " once
(yellow LED (4) blinks in 2-second intervals)
1 short beep
in 10 seconds
interval
1 long beep
end of the
blocking
2 beeps
Permanent
beep