Security Functions - BASETech 1892978 Notice D'emploi

11.1 Output 1
• Open the door via ID card (introducing the ID card)
• Open the door with the user code (enter the user code)
• Open the door by introducing the ID card and entering the user number. (Introduce the ID
card, the green LED blinks - now you have to enter the user number within 10 seconds.)
While the green LED (5) blinks, you can also return to normal operating mode /
standby mode by pressing the key " ".
11.2 Output 2
In this case, operation takes place with the user code. Output 2 is activated by entering the
user code.
Output 1 and 2 can be operated in any case with the programming code! Proceed as follows:
• Operating output 1:
Enter the programming code --- "#" --- "1" (manual code input).
Enter the programming code --- "1" (automatic code input)
• Operating output 2:
Enter the programming code --- "#" --- "2" (manual code input)
Enter the programming code --- "2" (automatic code input)

12. Security functions

• After 3 to 10 wrong entries (can be defined at wish), the system blocks automatically or
triggers the alarm.
• If the door is forced open, the system triggers the alarm immediately.
• If the door is left open longer than defined in the default settings for the door opening times,
the alarm sounds to remind you to close the door.
• If the tamper switch is activated, the system emits the following warning signals:
The yellow LED blinks and the buzzer sounds continuously. By deactivating the tamper
switch, the acoustic and optical warning signals are stopped. The tamper switch can also be
connected to a security system.
43