Acoustical And Optical Indicators - BASETech 1892978 Notice D'emploi

h) OUTPUT 1 = Output 1
Output 1 (connection of an automatic opener)
i) EXT. CARD READER
Connection of an external card reader. (Please observe the operating instructions of the
card reader!)
j) KEY ACT
Connection of external siren (piezo), or light, or relay.
k) ALM OUT
Connection of a siren or revolving light. (Ground contact)
l) DOOR SENS / GND
Connection of magnetic contact
m) OUTPUT 2= Output 2
Output 2 (connection of an automatic door opener)

9. Acoustical and optical indicators

Explanation of the
acoustical and optic
display
Standby operation
(usual operating
mode)
Successful key input 1 x blinking,
Successful card /
code input
Successful operation 2 x blinks
Successful code 2
input
Wrong card / code
input
Wrong operation
Status Output 1
Display Green LED
Yellow LED
1 x blinking
in 2 sec.
Intervals
then lit
10 seconds
2 x blinks Lit
2 x blinks
5 x blinks
5 x blinks
Output 2 Acoustic
Red LED Display
Buzzer
1 beep
2 beeps
2 beeps
Lit 2 beeps
5 beeps
5 beeps
White LED
lit for 10
seconds
35