Deleting Id Cards Or User Codes (Output 1); Programming The Door Opening Function (Output 1) - BASETech 1892978 Notice D'emploi

If you want to save several ID cards, you do not have to press the "number" key "#"
after each individual card. Save the individual cards as described above and press the
"number" key "#" after the last card. This saves all previous cards as well.
Input: "1" --- "4-digit User Number" --- "ID card" --- "#"
Saving user codes
• On the keypad (6) press the key "1" and now enter a 4-digit user number and a 4 to 8-digit
user code. Press the "number" key "#" - the green LED (5) blinks - Press the "number" key "#"
again and the green LED (5) stops blinking. Your entry is confirmed.
If you want to save several codes, you do not have to press the "number" key "#" again
after the second time. Save the individual codes as described above and press the
"number" key "#" after the last entry. This saves all previous entries as well.
Input: "1" --- "4-digit user number" --- "4 to 8-digit user code" --- "#" --- "#"

10.3 Deleting ID cards or user codes (output 1)

• Press the buttons "2" --- "0"--- "0" --- "0" --- "0" --- "#"
Now all saved ID cards and user codes are deleted.
• Press the buttons "2" --- "1" --- "Teach in ID card" / or "Enter user code" --- "#".
Now the entered ID card or the entered user code are deleted.
• Press the keys "2" --- "2" --- and enter the "user number" of the ID card or the "user code"
--- "#".
Now the ID card or the user code of the respective user number is deleted.

10.4 Programming the door opening function (output 1)

• Press the buttons "3" --- "0" --- "0" --- "#"
The door opener is now triggered by the ID card or the user code.
• Press the buttons "3" --- "0" --- "1" --- "#"
The door opener is now triggered by the ID card + user number.
Factory setting = door opener triggered by ID card or user code!
38