Allen + Roth 2416658 Mode D'emploi page 10

ASSEMBLY INSTRUCTIONS (CONT'D)
6. Place the fireplace grate (N) by matching the
bottom pins into the holes on the base (J).
Slot the USB cable from the heater underneath
through the cable hole on the base (J).
7. Remove the film from the adhesive on the top of
the fireplace grate (N) and place the fire log (M)
on the center of the fireplace grate (N).
Attach the USB cable from the heater into the
USB port behind the fireplace grate (N).
8. Screw two L-bracket (FF) onto the fireplace brick
wall (K) using four screws (EE).
Hardware Used
Screw
EE
L-Bracket
FF
6
7
8
x 4
x 2
10
N
M
2
N
1
EE
FF
K
J
3