Thermador P24GE Mode D'emploi page 9

FIG. 9
Front - Bottom of Unit, See Detail B, Below
Product Rating
Label/Serial Tag
3"
Min.
Power
Cord or
Conduit
3-Prong grounding type
receptacle connected to
a properly grounded and
polarized electrical supply
rated at 120VAC, 10 Amps,
( or 15A*) Single Phase,
60 HZ. NOTE: This is
not applicable to 240
VAC models P24GE and
PC484GE.
*15 Amp electrical supply
required for models
PC364GE, PC486GE, and
PC484GGE.
30 Amp 240 VAC electrical
supply required for models
P24GE and PC484GE.
Step 2: Cabinet Preparation
Threading compounds
must be resistant to Pro-
pane Gas
P24WOK 1/2" NPT
3/4" flex line
gas flow
A manual valve must be
installed external to the
appliance, in an accessible
location from the front, for
the purpose of shutting off
the gas supply.
All Installer supplied parts must
conform to Local Codes.
7