First Use - Philips HD7827 Mode D'emploi

First use

Unpacking
1 Remove the machine from the box.
Note: Make sure you store the 2-cup pod holder in a
safe place. It is an essential part of the machine.
Flushing the machine to fill the boiler
YOU CANNOT BREW COFFEE IF YOU
HAVE NOT FLUSHED THE SENSEO
MACHINE FIRST!
The flushing causes the boiler to be filled with water.
After this, the machine is ready for use.
Flush the machine in the following way:
1 Place a bowl with a capacity of at least 1.5 litres
on the cup tray.
2 Fill the water reservoir with cold water up to
the MAX indication and put it back onto the
machine.
3 Make sure a pod holder, without pod or pods,
is in place.
4 Put the plug in an earthed wall socket.
5 Press the on/off button 3.
The light rings around the 1-cup button q and the
2-cup button qq light up continuously.
6 To start flushing, press the 1-cup button q and
the 2-cup button qq briefly at the same time.
EnglisH
COFFEE
®
11