Mechanical Rigging - Zodiac OPEN 3.1 Manuel Du Propriétaire

LADDER POSITION
V-8 MECHANICAL RIGGING
For appearance purposes, all the cables and wiring for the rigging will pass from the console (1) to
the engine (2) through the hull. We recommend passing these different elements through before
attaching the equipment definitively to the deck.
We recommend running the cables along the deck counter mould (3) to the boat's chain plate to
prevent any blockage.
If necessary, use the hole in the bolster (4) to pull the cables towards the chain plate.
613770 A
INSTALLATION AND CIRCUIT – Boarding
DANGER!!!
ALWAYS MAKE SURE THAT THE ENGINE IS SWITCHED OFF BEFORE
ANYONE CLIMBS BACK ON BOARD USING THE STERN LADDER.
WARNING
WHEN THE BOAT IS OPERATED ALONE AND WHEN THE BOARDING
LADDER CANNOT BE DEPLOYED FROM THE WATER, IT MUST BE LEFT
IN PLACE FULL TIME.
3
1
Page 58 / 65
2
4
Edition 2